EV Charger Solution



BENY Smart EV Charger with Type 2 (IEC 62196-2) Plug Socket IP55 Electric Vehicle Charging Station EV Wallbox CE Certified
*Wall-Mounted
*DLB and Solar compatible
*IP55/65
*CE & UKCA&TUV&CB
*Smart App
*OCPP 1.6J
*Wi-Fi/Ethernet/Bluetooth/4G
*Full Protection
To safely balance the energy usage between your electric car chargers and other home appliances to make your car chargers in the most efficient way. DLB (Dynamic Load Balancing) is available in the BENY BCP series AC EV Charger for home use, when the EV charger is working with other household appliances at the same time, the DLB box can maintain the dynamic balance of the total household current and ensure the safety of electricity to avoid home over load.
Monitors the electrical system and in the event of a fault automatically disconnects all poles including the earth conductor. If the user uses an EV charger equipped with PEN protection, its internal design has a contactor to cut off the ground, once the PEN line is cut off, the contactor KM1 and KM2 are immediately and automatically disconnected, there is only a weak leakage current between CP and PE to L line, its current value is less than 1mA, which is the smallest perceived leakage current of the human body, people can disengage themselves, no safety risks.
BENY EV chargers can be controlled by a smart APP via WIFI or Bluetooth connection: 1.One to one binding EV charger by resetting the password, prevent the EV charger being stolen 2.View charging data and status 3.Set up various charging configurations, charging current, DLB mode, etc 4.Scheduled charging 5.Firmware update
Please fill out the inquiry form. Our team will be in touch with you asap.
The signature LED ring provides users with a clear indication of the charging session status.
Built-in protections prevent overcurrent and AC/DC leakage and make sure the charging environment is safe for the building and the vehicle.
The integrated kWh meter provides you with accurate measurements of the energy being used for EV charging.
Receive automatic firmware updates and remote maintenance via EVBox BusinessLine's Wi-Fi and cellular connection.
Add customized branding to highlight your business's commitment to electric mobility and increase your brand recognition.
EVBox BusinessLine can deliver up to 22 kW per connector to every electric car equipped with a Type 2 plug, or up to 7.4 kW for electric cars with a Type 1/SAE J1772 plug.
Wallbox Models | BCP-A2N-P | BCP-B2N-P | BCP-AT2N-P | BCP-BT2N-P |
---|---|---|---|---|
itemitem | ![]() | ![]() | ![]() | ![]() |
Categorization | Tethered | Socket | Tethered | Socket |
Maximum Power | 7.4kW | 22kW | ||
Input Voltage /Output voltage | AC230 1-Phase | AC400 3-Phase | ||
Input Frequency | 50/60Hz | |||
Meter | Metering Chip | |||
Display | LED Lights | |||
Protection Degree | IP65 | IP55 | IP65 | IP65 |
Storage temperature | -25℃~+55℃ | |||
Maximun Altitude | -40℃-85℃ | |||
Maximun Altitude | <2000m | |||
Socket Type | / | Type 2 | / | Type 2 |
Maximum Output Current | 32A | |||
Efficiency | about 100% | |||
Working humidity | 95% non-condensing | |||
Cable legth | 6 m (Supports customization of other lengths) | |||
Standards | EC61851-1,IEC61851-21-2,IEC61000-4 | |||
Communication interface | 4G\Wireless\LAN Port | |||
Communication protocol | OCPP1.6-J | |||
User management | Bluetooth/Wifi/Smart APP | |||
Starting | Auto-start standard / RFID card | |||
RFID | ||||
DLB | ||||
Wi-Fi | ||||
Ethernet | ||||
Bluetooth | ||||
4G | ||||
Over Voltage &Under Voltage Protection | ||||
Emergency Stop | ||||
Over Current Protection | ||||
CP Signal Short Circuit Protection | ||||
Over Temperature Protection | ||||
Lightning Protection | ||||
Contactor Adhesion Protection | ||||
Select | Standard: | Optional |
If you want to install residential electric vehicle chargepoints, our specialist team can help you every step of the way.
www.evb.com
Copyright © 2022, EVB. Terms of Service,Cybersecurity commitment letterand Privacy Policy. All rights reserved. Powered by beny